Economical High Heat Resistant RFID Tag

A metal-mountable RFID tag that is resistant up to 400 degrees F. Useable in WIP and paint line applications. Economical so it can either be disposed of or reused.

Ekahau Vision™ 2.0 – Location Analytics Platform

Gain visibility into the assets, people and workflows that drive business decisions.

EM4095 - LF (125KHz-134 KHz) Read write analog front end for RFID basestation

The EM4095 is a CMOS integrated transceiver circuit intended for use in RFID basestations to perform the following functions: - antenna driving with carrier frequency - AM modulation of the field for writable transponder - AM demodulation of the antenna signal modulation induced by the transponder - communicate with a microprocessor via simple interface The EM4095 is a perfect replacement for the (obsolete) U2270B from Atmel.

EM4124 - EPC Gen2 RFID IC

EPC Class 1 Gen 2 / ISO 18000-6C / ISO 18000-6D (TOTAL) RFID IC

EM4233 - 2k bit Read/Write High Security ISO15693 RFID IC

The EM4233 is a long range passive CMOS integrated circuit intended for use in applications requiring a contactless read/write memory offering a high and tailored level of security. The configurable 2k bit EEPROM memory included in the chip is organized in 64 words of 32 bits. The high level of flexibility in the memory management permits that a memory word can be read/write protected and/or locked separately.

EM4325 - UHF Gen2 Battery Assisted Passive RFID IC w/Temp Sensor & SPI Interface

UHF Battery Assisted Passive (BAP) 18000-6 Type C (Gen2) and Type C/D (Gen2/TOTAL) RFID IC with Integrated Temperature Sensor and SPI Interface

EM4333 - Dual ISO15693/ISO14443 Contactless Smart Card IC

The EM4333 is contact less Smart Card which integrates vicinity as well as proximity protocols in one chip using same antenna. It makes it usable in wide range of applications. VICC part supports ISO15693 air interface with high level of security of data transfers. EM4333 brings a high security level offering a new open stream cipher Grain128a with key length of 128 bits. Grain cipher supports three pass mutual authentication and Message Authentication Code to ensure security of data transfers.

EM4830 - Dual Interface (Contact/Contactless) FLASH Based Smart Card Integrated Circuit

EM4830 integrated circuit is designed specifically for multi-application cards in access control, transportation and ticketing. It offers dual multiprotocol interfaces to support the largest range of applications, thus combining contact and contact-less interface technologies. Due to integrated on-chip power switch EM4830 can be powered from contact or contactless interface. In contact power mode, the device can communicate with both interfaces ISO7816 or ISO14443. In contactless mode, the devi